2025 HIGH-QUALITY RELIABLE NCP-MCI-6.10 DUMPS EBOOK HELP YOU PASS NCP-MCI-6.10 EASILY

2025 High-quality Reliable NCP-MCI-6.10 Dumps Ebook Help You Pass NCP-MCI-6.10 Easily

2025 High-quality Reliable NCP-MCI-6.10 Dumps Ebook Help You Pass NCP-MCI-6.10 Easily

Blog Article

Tags: Reliable NCP-MCI-6.10 Dumps Ebook, NCP-MCI-6.10 Dump Torrent, Reliable NCP-MCI-6.10 Braindumps, NCP-MCI-6.10 Valid Vce, NCP-MCI-6.10 Exam Cram Review

CramPDF is within your reach to obtain the top-rated Nutanix NCP-MCI-6.10 Exam Questions. And it guarantees that you will pass the NCP-MCI-6.10 certification exam on the maiden attempt. Several aspiring candidates have already heard about the prestigious Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI v6.10) NCP-MCI-6.10 Certification. But the real problem they face is their inability to find trustworthy, updated, and relevant Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI v6.10) NCP-MCI-6.10 exam practice tests that can assist them.

One of the most important functions of our NCP-MCI-6.10 preparation questions are that can support almost all electronic equipment, including the computer, mobile phone and so on. If you want to prepare for your exam by the computer, you can buy the Software and APP online versions of our NCP-MCI-6.10 training quiz, because these two versions can work well by the computer. Moreover, the APP online version of our NCP-MCI-6.10 learning materials can also apply the IPAD, phone, laptop and so on.

>> Reliable NCP-MCI-6.10 Dumps Ebook <<

NCP-MCI-6.10 Dump Torrent - Reliable NCP-MCI-6.10 Braindumps

If you choose our NCP-MCI-6.10 study torrent, you can make the most of your free time, without using up all your time preparing for your exam. We believe that using our NCP-MCI-6.10 exam prep will help customers make good use of their fragmentation time to study and improve their efficiency of learning. It will be easier for you to pass your exam and get your certification in a short time. If you decide to use our NCP-MCI-6.10 Test Torrent, we are assured that we recognize the importance of protecting your privacy and safeguarding the confidentiality of the information you provide to us. We hope you will use our NCP-MCI-6.10 exam prep with a happy mood, and you don’t need to worry about your information will be leaked out.

Nutanix NCP-MCI-6.10 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Conduct Custom Monitoring within a Nutanix Multicloud Environment: This section of the exam measures the skills of Cloud Analysts and Systems Engineers and covers custom monitoring for optimized performance management. Candidates must analyze performance charts, set retention policies, create custom service level agreements (SLAs), and manage storage based on policies. Creating reports involves identifying the required type, selecting generation frequency, determining retention properties, and customizing report formats for different monitoring needs. Effective monitoring ensures better resource utilization, system efficiency, and proactive issue resolution within the multi-cloud environment.
Topic 2
  • Manage VMs within a Nutanix Multicloud Environment: This section of the exam measures the skills of Cloud Administrators and Virtualization Engineers and covers managing virtual machines (VMs) within a Nutanix multicloud environment. It includes creating and updating VMs by determining hardware requirements, boot modes, sizing, and configuration based on application needs. Candidates must understand how to deploy VMs using templates, snapshots, and image configurations, ensuring the correct formats for importing and exporting VMs. Migration processes require knowledge of prerequisites, storage, network settings, and software compatibility. Additionally, configuring VM categories and attributes is essential for proper organization and management within the environment, ensuring alignment with labels, storage policies, and security settings.
Topic 3
  • Configure Disaster Recovery and Data Protection within a Nutanix Multicloud Environment: This section of the exam measures the skills of Disaster Recovery Specialists and Cloud Engineers and covers configuring protection policies and domains for data security and recovery. Candidates need to identify the right entities for protection, schedule backups, define retention policies, and set up replication to remote sites. Recovery plans must be configured and executed with proper scripting, network mapping, and failover strategies. Metro replication requires understanding failover methodologies, comparing solutions on different hypervisors, and preventing split-brain scenarios. Effective disaster recovery planning ensures minimal downtime and data integrity across environments.
Topic 4
  • Manage Clusters within a Nutanix Multicloud Environment: This section of the exam measures the skills of Infrastructure Engineers and Systems Administrators and covers the administration of Nutanix clusters. Storage management includes creating, reading, updating, and deleting storage containers and volume groups. Configuring AOS and Prism Central settings involves authentication, SSL certificate management, IAM role-based access control, and configuring network segmentation. Network administration procedures focus on creating VLAN-backed subnets, virtual switches, and load-balancing policies while monitoring NIC usage. Lifecycle management includes performing hardware and software updates and maintaining firmware. Hardware maintenance involves adding or removing nodes and physical disks while ensuring proper upgrades and replacements. Intelligent operations require configuring capacity policies, discovering application relationships, and simulating scenarios to optimize performance.
Topic 5
  • Troubleshoot a Nutanix Multicloud Environment: This section of the exam measures the skills of Technical Support Engineers and IT Operations Specialists and covers diagnosing and resolving common issues within a Nutanix multi-cloud environment. Troubleshooting protection policies and recovery plans requires identifying network mapping failures, vNIC issues, script execution problems, and connectivity failures. Metro replication troubleshooting involves addressing naming conventions, network limitations, and replication states. Security issues in AOS and Prism Central must be resolved by managing CVM communications, security warnings, and log analysis. LCM operations require diagnosing failures in inventory updates and version upgrades. Performance troubleshooting involves analyzing logs, reading performance charts, and adjusting VM configurations to meet performance needs.

Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI v6.10) Sample Questions (Q51-Q56):

NEW QUESTION # 51
An administrator receives analert in Prismstating:
"Storage container <container_name> on cluster <cluster_name> will run out of storage resources in approximately 1 day." However, the cluster hasplenty of available space remaining.
What configuration setting is causing the container to run out of space while the cluster has space remaining?

  • A. Advertised Capacity is set too low.
  • B. Reserved Capacity is set too high.
  • C. Replication Factor is set too high.
  • D. Compression is set too low.

Answer: B

Explanation:
Reserved Capacity settings define how much storage is exclusively allocated for a specific container.
* Option B (Reserved Capacity is too high) is correct:
* If too much space is reserved for a container, it can report "out of space" while the cluster still has free capacity.
* Options A, C, and D are incorrect:
* Advertised Capacity, Compression, and RF settings do not directly cause storage exhaustion unless misconfigured with Reserved Capacity.
References:
* Nutanix Storage Best Practices#Configuring Reserved and Advertised Capacity
* Nutanix KB#Troubleshooting Storage Container Out-of-Space Alerts


NEW QUESTION # 52
An administrator is configuring areplication scheduleonmultiple remote locationsdeployed using asingle- node cluster. The goal is to achieve thelowest possible RPO (Recovery Point Objective).
How should the administrator configure the replication schedule?

  • A. Configure NearSync replication.
  • B. Configure a schedule for 1 minute up to 15 minutes.
  • C. Configure a schedule for 16 minutes up to 59 minutes.
  • D. Configure Async replication.

Answer: B

Explanation:
Nutanix NearSync replication provides the lowest RPO (as low as 1 minute) and is the best option for minimizing data loss in DR scenarios.
* Option D (Configure a schedule for 1 minute up to 15 minutes) is correct:
* NearSyncallows anRPO as low as 1 minute, providingnear-continuous data protection.
* This isideal for mission-critical applicationswhere minimal data loss is required.
* Option A (Configure NearSync) is incorrect:
* WhileNearSync is the best choice,just enabling it is not enough-the schedule must be set to1-
15 minutes.
* Option B (16 to 59 minutes) is incorrect:
* NearSync operates within a 1-15 minute range. If set above 15 minutes,it defaults to Async replication.
* Option C (Async replication) is incorrect:
* Async replication typically has an RPO of 1 hour or more, which does not meet thelowest RPO requirement.
References:
* Nutanix Protection Policies Guide#NearSync vs. Async Replication
* Nutanix Bible#RPO and RTO in Disaster Recovery
* Nutanix KB#Configuring NearSync Replication for Single-Node Clusters


NEW QUESTION # 53
An administrator started anLCM upgrade of the AHV hostsbut realized that theupgrade would exceed the planned maintenance window.
Which feature should be leveraged to prevent additional updates from occurring?

  • A. Run thelcm_task_cleanup.pyscript.
  • B. Use theStop Update feature in LCM.
  • C. Cancel the LCM tasks via theErgon command line (ecli).
  • D. RestartGenesison the cluster to restart the LCM service.

Answer: B

Explanation:
When performing aLife Cycle Manager (LCM) upgrade, therecommended way to stop the process is to use the "Stop Update" feature in LCM (Option D).
* Option A (Cancel via Ergon ecli)is not a recommended approach since manually interfering with running tasks can cause inconsistencies.
* Option B (lcm_task_cleanup.py script)is used for post-upgrade cleanup but does not stop ongoing updates.
* Option C (Restarting Genesis)does not stop an LCM upgrade and can cause instability.
References:
* Nutanix Life Cycle Manager (LCM) User Guide
* Nutanix KB:Best Practices for Stopping and Restarting LCM Tasks
* Nutanix Prism Central #LCM Feature Documentation


NEW QUESTION # 54
Refer to Exhibit:

An administrator notices the message shown in the exhibit when navigating to LCM from Prism Central.
Which action should the administrator take to update LCM to the latest version?

  • A. Run anAOS upgrade.
  • B. Perform anInventory Scan.
  • C. Download and install the latest LCM version from a CVM.
  • D. Run anAHV upgrade.

Answer: B

Explanation:
When Life Cycle Manager (LCM) reports thata newer framework version is available, thecorrect actionis toperform an inventory scan (Option C).
* Performing an inventory scan updates the available firmware/software versionsand allows LCM to download required updates.
* Option A (Run an AOS upgrade)is unrelated to the LCM framework update process.
* Option B (Run an AHV upgrade)is a separate component update and does not affect the LCM framework.
* Option D (Download manually from a CVM)is not necessary because LCM updates are automatically pulled after an inventory scan.
References:
* Nutanix LCM User Guide #Updating LCM Framework and Performing Inventory Scans
* Nutanix KB #Best Practices for LCM Updates
* Nutanix Prism Central #LCM Update Workflow


NEW QUESTION # 55
An administrator needs to set up aprotection policyin preparation for aDisaster Recovery (DR) test.
What is the first step required to satisfy this task?

  • A. Create a point-in-time snapshot of source VMs.
  • B. Install NGT (Nutanix Guest Tools) on VMs where applications are supported.
  • C. Create an Availability Zone between Production and DR.
  • D. Convert the source cluster to AHV.

Answer: C

Explanation:
For NutanixDisaster Recovery (DR) protection policies, thefirst stepis to establish a connection between the Production cluster and the DR site, which is done by creating anAvailability Zone (AZ) (Option B).
* Availability Zones (AZs) define remote sites for replicationand are a requirement for configuring protection domains and disaster recovery plans.
* Option A (Installing NGT)is not necessary for setting up replication but is useful for application- consistent snapshots.
* Option C (Converting the source cluster to AHV)is not required, as Nutanix supports cross- hypervisor DR betweenESXi and AHV.
* Option D (Creating a point-in-time snapshot)is a later step after setting up theAvailability Zone and Protection Policy.
References:
* Nutanix Protection Policies and DR Documentation
* Nutanix Bible #Disaster Recovery Planning
* Nutanix Support KB #Configuring Availability Zones in Prism Central


NEW QUESTION # 56
......

We have technicians to check the website every day, and therefore if you choose us, you can enjoy a safe online shopping environment. In addition, NCP-MCI-6.10 exam materials are compiled and verified by professional specialists, and therefore the questions and answers are valid and correct. NCP-MCI-6.10 learning materials cover most of knowledge points for the exam, and you can master them as well as improve your professional ability in the process of learning. You can receive the download link and password within ten minutes after paying for NCP-MCI-6.10 Exam Dumps, if you don’t receive, you can contact us, and we will solve this problem for you.

NCP-MCI-6.10 Dump Torrent: https://www.crampdf.com/NCP-MCI-6.10-exam-prep-dumps.html

Report this page